TES 5-2422WI

DC/DC Converter • • • • • TES 5WI Series, 5 Watt Compact SMD package 33.4 x 25.6 mm footprint Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range –40°C to +70°C • • Short circuit protection • • • Remote On/Off Input filter to meet EN 55032, conducted class A High accuracy of pin co-planarity The TES 5WI series is a family of high performance 5W DC/DC converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of –40 to +70°C at full load. Further features are built-in EMI-filter to meet EN 55032 conducted class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualified for high temperature lead-free reflow solder process 3-year product warranty Models Order Code Input Voltage Range TES 5-2410WI TES 5-2411WI TES 5-2412WI TES 5-2413WI TES 5-2421WI TES 5-2422WI TES 5-2423WI TES 5-4810WI TES 5-4811WI TES 5-4812WI TES 5-4813WI TES 5-4821WI TES 5-4822WI TES 5-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 1'200 mA 1'000 mA 420 mA 335 mA 500 mA 210 mA 165 mA 1'200 mA 1'000 mA 420 mA 335 mA 500 mA 210 mA 165 mA September 28, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 210 mA 165 mA –5 VDC –12 VDC –15 VDC 500 mA 210 mA 165 mA typ. 76 % 80 % 83 % 83 % 80 % 83 % 83 % 76 % 80 % 83 % 83 % 80 % 83 % 83 % Page 1 / 4 TES 5WI Series, 5 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Short Circuit Input Power 20 mA typ. 10 mA typ. 250 mA typ. 125 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 7 VDC min. / 8 VDC typ. / 9 VDC max. 14 VDC min. / 16 VDC typ. / 18 VDC max. 6 VDC min. / 7 VDC typ. / 8 VDC max. 13 VDC min. / 15 VDC typ. / 17 VDC max. 10 mAp-p typ. 5 mAp-p typ. (The need of an external fuse has to be assessed in the final application.) 3000 W max. Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (10 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output ±2% max. 1% max. 1% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 3% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Overload Protection Output Current Limitation Transient Response - Response Deviation - Response Time 85 mVp-p max. 2'000 µF max. 2'000 µF max. 470 µF max. 330 µF max. 680 / 680 µF max. 330 / 330 µF max. 220 / 220 µF max. 10 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 10 ms max. Continuous, Automatic recovery Foldback Mode 115% min. of Iout max. 2% typ. / 6% max. (25% Load Step) 250 µs typ. / 500 µs max. (25% Load Step) Safety Specifications Standards - IT / Multimedia Equipment Designed for IEC/EN/UL 62368-1 (not certified) - Conducted Emissions EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) EMC Specifications EMI Emissions - Radiated Emissions All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 28, 2023 Page 2 / 4 TES 5WI Series, 5 Watt General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Moisture Sensitivity (MSL) Washing Process Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –40°C to +70°C (without derating) +100°C max. –50°C to +125°C 3.3 %/K above 70°C See application note: www.tracopower.com/overview/tes5wi Natural convection (20 LFM) On: 2.5 to 5.5 VDC or open circuit Off: -0.7 to +0.8 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 10 mA max. -0.7 mA max. 210 - 350 kHz (PFM) 340 kHz typ. (PFM) Functional Insulation 1'500 VDC 1'000 MΩ min. 650 pF typ. 750 pF max. 1'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) Not allowed Plastic resin (UL 94 V-0 rated) Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD24 Lead-Free Reflow Soldering (acc. J-STD-020E) See application note: www.tracopower.com/info/reflow-soldering.pdf 14 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) c77aae5d-5033-4d0d-826b-295f60f75778 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes5wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 28, 2023 Page 3 / 4 TES 5WI Series, 5 Watt (0.059) 2.76 5.08 (0.109) (0.200) ° 15.24 (0.600) 5 1. 6) .0 (0 9 10 11 12 1.5 (0.006) 3 0.15 2 0-5 22.6 (0.89) 20.8 (0.82) 1 12.8 (0.5) 16 15 14 13 25.6 (1.01) 24 23 22 0.15 (0.006) 0.15 0.4 (0.02) 1.5 (0.006) 9.8 (0.39) (0.40 ±0.02) 10.2 ±0.5 Outline Dimensions (0.06) 7.62 (0.300) 33.4 (1.31) All dimensions in mm (inches) Tolerance: x.x±0.25 (x.xx±0.01) Tolerance: x.xx±0.13 (x.xxx±0.005) Pin tolerance: ±0.05 (±0.002) Pinout Pin Single Dual 1 Remote On/Off Remote On/Off 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 NC Common 10 NC NC 11 NC –Vout 12 NC NC 13 NC NC 14 +Vout +Vout 15 NC NC 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 24 NC NC NC: Not connected 1.7 5.08 15.24 7.62 (0.20) (0.60) (0.30) (1.06) (0.82) 27.0 20.8 (0.07) (0.94) 23.9 (0.10) 3.1 2.54 (0.12) Recommended Solder Pad Layout 27.94 (1.10) Dimensions in mm (inch) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 28, 2023 Page 4 / 4